Silcor 580 (Two-part)

Intended for use as a robust waterproofing membrane on exposed substrates set to fa ls, when overcoated with
SILCOR Top Coat 80 as UV colour stable membrane protection, to non-trafficable and foot trafficable areas.
SILCOR 580 is also suited to use on exposed and non-exposed areas, when overcoated with a SILCOR 580 wear coat
and SILCOR Top Coat 80 as UV colour stable membrane protection, to heavy foot traffic and light vehicle traffic areas.

Typical applications include:
Stadiums, car park decks and other heavy foot or car vehicle traffic areas (with wear coat and top coat protection
over)
Balconies, roof decks and podiums (with top coat protection over)
Green roofs and landscaped decks
Plant room floors (with top coat protection over)
Impact resistant, resilient flooring in laboratories, sports centres and gymnasiums
Internal wet area floors under or over screeds

Certified Class III – compliant with AS 4654.1-2012 for use as external, non-exposed waterproofing, insta led to
the requirements of AS 4654.2-2012
Certified Class III – compliant with AS/NZS 4858-2004 for use as internal wet area waterproofing, insta led to the
requirements of AS 3740-2021
Very Low VOC – <35g/L – reduced EH&S issues on site High physical properties; >700% elongation and >7MPa tensile strength
Chemically cured by polyurethane resin – hardener reaction. Fast through cure, even during low humidity conditions
Seamless – liquid applied and monolithic, eliminating vulnerable joins, seams, and laps
Semi Self-Leve ling – flows out to a smooth finish on horizontal substrates set to fa ls
Fully Bonded – no water tracking between membrane and substrate
Applied by roller, notched squeegee, pin rake, trowel or brush
Cold Applied – no flame or heat required for application
Accommodates typical structural movements encountered in we l-designed construction
Bridges non-structural concrete shrinkage cracks
Polyurethane chemistry – free from bitumen or tar – wi l not bleed or stain

Grey

See data sheet: View PDF