Enviro Shield – Part A & B (Two-part) 4L Kit

Enviro Shield can be used to provide a hydrostatic barrier coating in the following situations:

Negative side pressure up to 25m head

• Treatment and mitigation of rising damp
• Below grade basements & car parks
• Barrier coat for water tank membranes
• Tunnels & Lift wells
• Retaining walls

Negative side pressure up to 3m head

Enviro Shield can be used to provide either a negative or positive hydrostatic barrier coating under low pressure (up to 3m head) in the following situations:

• Efflorescence control
• Treatment and mitigation of rising damp

Positive side pressure

• Barrier coat under subsequent membranes
• Window reveals

Primer

Enviro Shield can be used as a moisture tolerant primer in the following situations:

• Self-priming barrier coat
• Internal and External Wet Areas
• Retaining Walls
• Enviro Shield can also be used to promote adhesion when a premium priming solution is required

• Bonds to damp and green concrete < 25% MC
• Resistant to a wide range of chemicals
• Negative side barrier
• Rising damp control
• High solids content
• Low VOC content
• Easy to apply
• Water based

Primer Diluted, 20% Water

LITRES/m2 = 0.32

m2/20L KIT = 72

WFT/COAT = 320μm

NUMBER
OF COATS = 1

FINISHED DFT
(ALL COATS) = 140μm

Primer Undiluted

LITRES/m2 = 0.32

m2/20L KIT = 60

WFT/COAT = 320μm

NUMBER
OF COATS = 1

FINISHED DFT
(ALL COATS) = 160μm

Positive

LITRES/m2 = 0.32

m2/20L KIT = 60

WFT/COAT = 320μm

NUMBER
OF COATS = 1

FINISHED DFT
(ALL COATS) = 160μm

Negative, up to 3m Head

LITRES/m2 = 0.66

m2/20L KIT = 30

WFT/COAT = 320μm

NUMBER
OF COATS = 2

FINISHED DFT
(ALL COATS) = 320μm

Negative, 3 – 25m Head

LITRES/m2 = 1.0

m2/20L KIT = 20

WFT/COAT = 320μm

NUMBER
OF COATS = 3

FINISHED DFT
(ALL COATS) = 480μm

Coverage dependent on weather and substrate conditions.

Grey.

See data sheet: Enviro Shield – Envirosystems