Waterproofing and protection of water retaining
structures, such as potable water tanks,
reservoirs, dams, water channels, fountains
and swimming pools.
• Waterproofing of below-grade structures like
basements, retaining walls, foundations,
tunnels, galleries subject to high negative
water pressure.
• Waterproofing and protection of concrete in
waste water treatment plants, settlement tanks,
etc.
• Waterproofing and protection of concrete
structures against carbonation, freeze-thaw
cycles, de-icing salts and marine environment,
such as civil works, bridges, architectural
buildings, residential facades, etc.
• Waterproofing and protection of concrete
against soil salts and aggressive ground water,
in underground jobs, foundations, etc.
• Waterproofing of roofs, terraces, balconies,
etc.
• Waterproofing of window boxes, gardens and
other surfaces subject to root penetration.
• Internal waterproofing of bathrooms, kitchens
and other wet areas in hotels, hospitals,
offices, residential buildings, etc.
Maxseal Flex M
$300.00
MAXSEAL® FLEX-M is a one-component cement-based mortar. Once mixed only with water, it provides a high-performance flexible coating, for waterproofing and protection of concrete against positive and negative pressure.
Provides a fully-flexible coating which ensures
complete waterproofing even in the most
severe conditions, as high negative water
pressure.
• Good crack-bridging capability of the concrete
(> 0,5 mm).
• Acts as an anti-fracture membrane between
the substrate and other finishing coats if
applied.
• Excellent barrier effect against CO2 and
chlorine (Cl-), thereby prevents carbonation
and corrosion of steel rebars.
• Allows water vapour diffusion and the
breathability of the concrete.
• Resistant to abrasion and UV rays.
• Withstands atmospheric pollution, corrosive
effects of salt water or de-icing salts, and the
freeze/thaw cycles.
• Excellent adhesion. Do not require primer and
can be applied on wet surfaces.
• Non-toxic, suitable for contact with potable
water.
• Longer lasting that other coatings, avoiding
maintenance costs.
• Environmentally friendly and suitable for
application in poor ventilation areas.
• Withstands the root penetration.
MAXSEAL® FLEX-M is applied in two coats of 1 –
1,5 kg/m2 per coat, for a total consumption of 2 –
3 kg/m2 in two coats. These figures may vary
depending on porosity, substrate conditions and
application method, a preliminary test on-site will
determine consumption exactly.
Grey.
See data sheet: Maxseal Flex – M | Drizoro