WPM 002 40kg


ARDEX WPM 002 (Superflex Two Part) is a tough, fast drying two component waterproofing membrane specifically designed for use under tiles. The product has been uniquely formulated with synthetic microfibres to increase its strength and eliminate the need for a separate reinforcement mat. ARDEX WPM 002 is based on the most advanced acrylic polymer technology, and is totally resistant to re- mulsification.

  • Internal and external wet areas.
  • Balconies.
  • Decks.
  • Areas that will be tiled or otherwise protected from regular foot traffic.
  • Concrete.
  • Renders and screeds.
  • Fibre cement.
  • Plasterboard.
  • Plywood.
  • Particleboard.
  • Permanent immersion.
  • Brush, roller application.
  • Does not become brittle with age.
  • Non re-emulsifying.
  • Liquid reinforcement.
  • Low odour.
  • Safe to use in confined space.
  • Designed for tiling.
  • Early access for following trades.
  • Fast drying ARDEX WPM 002 can be tiled over in 16–24 hours, or 4 hours @ 23°C / 50% RH in non critical areas*

*Critical areas include areas where the membrane is
applied at greater than 0.5mm or over impermeable
substances such as over bond breakers or incorporating
other reinforcement. Longer drying times are necessary
in these areas.

  • Two coats are recommended for an effective waterproof membrane.
  • Coverage will vary depending on the porosity of the surface.
  • One 40kg kit will cover approximately 16–24m2 –(based on two coats) depending on area requirements between wall and floor surfaces to be treated.

Refer to table in the datasheet.

  • Liquid: white.
  • Powder: off white.