Maxseal Flex

$380.00

A two part flexible waterproofing coating for pools, decks, planter boxes and areas subject to movement.

  • Waterproofing and protection of water retaining structures, such as drinking water tanks, reservoirs, water mains and swimming pools.
  • Waterproofing of below-grade structures.
  • Covers shrinkage and hairline cracks in the concrete.
  • Acts as an anti-fracture membrane between the substrate and other finishing coats.
  • Excellent protection for concrete, being both a CO2and chlorine (Cl-) barrier and thereby preventing carbonation and electrochemical corrosion.
  • Permeable to water vapour, allows the substrate to breathe.
  • Resistant to abrasion and is UV stable.
  • Withstands atmospheric pollution, corrosive effects of salt water and freeze/thaw cycles.
  • Resists hydrostatic negative and positive pressure from groundwater when used for interior underground applications.
  • Excellent adhesion and easy to use. Does not require bonding agents and can only be applied on wet surfaces.
  • Non-toxic and chloride free. Suitable for contact with potable water.
  • Longer lasting than other coatings, avoiding maintenance costs.
  • Environmentally friendly.
  • Withstands root penetration, when properly reinforced with fibre glass mesh.

Description

Once applied and cured, MAXSEAL FLEX provides a non-toxic, flexible and waterproof coating with very high adhesion on those common substrates in construction- concrete, natural and artificial stone, bricks, concrete, traditional mortar plasters, blocks, Hebel etc.

Handy Pack includes a brush and a mixer.

  • Provides a fully flexible coating which ensures complete waterproofing in the most severe conditions, even in high negative or positive water pressure.

For extreme situations Requiring full 9 bar positive and 4 bar Negative waterproofing.

  • Apply two coats, using 1 – 1,5 kg/m2 of MAXSEAL FLEX per coat and allow a minimum of 16 hours and a maximum of 3 days between applications. Prior to application thoroughly wash down and saturate the surface, but do not leave free standing water. Thickness per layer should be 1 mm. approximately, it is very important to avoid very thin or, thick application. WET surface again prior to application of second coat.

For all other waterproofing both positive/negative.

  • An application achieving a yield of 2 coats finish at 20m2 per Kit (35 Kg) is recommended.

In those areas such as fissures, concrete joints and active cracks.

  • Should be sealed using Maxjoint Elastic, once repaired and sealed, MAXSEAL FLEX should be applied with a fibre glass mesh of 40-60 g/m2 .